Zapier reaches apps Omni Octo has no card for. You add actions to your Zapier MCP server, in Zapier, and connect that server here. Each action becomes a tool your agents can use.
Copperleaf Bike Works wants its front-desk agent, Copperleaf Front Desk, to send a customer a Calendly link when they would rather pick a time themselves. Calendly is in the directory, and it is set up through Zapier.
Two ways to connect Zapier
Open Add integration on /integrations and pick the Zapier card. The panel, “Connect Zapier”, asks “How do you want to connect?” and offers two ways:
| Card | What you do |
|---|---|
| Sign in with Zapier — “A window opens. Nothing to copy.” | Sign in to Zapier in the window that opens and allow access |
| Server URL with token — “Paste the address, with its token, yourself.” | Copy your server’s address from Zapier and paste it |
Signing in is the easier one. For the address, the panel says where to find it:
“In Zapier MCP, open your server › Connect, create credentials, and copy the Full URL under “Option 2: URL with token”. It’s shown only once.”
Open Zapier opens Zapier MCP in a new tab. Paste the address in Server URL with token. The token in it is a key, so the panel says “This address contains a private key. We’ll store that part encrypted.”, and shows the address masked once you press Connect. Omni Octo then lists the server’s actions — “Contacting server… Stops after 15 s.” — before anything is saved.
| It says | What to do |
|---|---|
| ”The server didn’t accept the token.” | Copy the Full URL again. Zapier shows it only once, so create new credentials if you lost it |
| ”Nothing answered at this address. Check you copied it; for an n8n workflow, turn it on (Active) first.” | Check you pasted the whole address |
| ”The server didn’t answer within 15 seconds. Try again.” | Try again in a minute |
| ”The server has no tools yet. Add tools to it where you manage the server, then check again.” | Add actions to your server in Zapier, then press Check again |
Choose which actions agents may use
The next step, Choose tools, lists your server’s actions grouped by app, each with its own Ask the customer first switch. It works the same as for any app: see Connect an app by signing in.
Two things are particular to Zapier.
Agentic mode. If you signed in, Zapier may have set your server up to pick actions on its own. The panel then lists Zapier’s own helper tools and says:
“Zapier set this server up to choose actions on its own (agentic mode). To pick each action yourself, open this server in Zapier, go to Settings and choose Managed, add actions under Apps, then press Refresh.”
Open Zapier MCP takes you there. After you switch and press Refresh, the panel says “The server now lists the actions you added in Zapier (Managed). Tick the ones agents may use.”
Actions Zapier fills in. An action whose details Zapier’s AI fills in says “Zapier’s AI fills in the details”. Those are never ticked for you.
Tick more than five actions from one app and the panel suggests “Give an agent only the tools it needs — with fewer tools it picks the right one more often.”
Guided setups
Some apps in the directory are set up through Zapier with steps on screen:
| App | Where to start |
|---|---|
| Calendly | Its card, labeled Via Zapier |
| HubSpot | Its card, then Through Zapier and Continue with Zapier |
| Airtable | Its card, then Through Zapier and Continue with Zapier |
| Zendesk | Its card, labeled Via Zapier (below) |
HubSpot and Airtable can also sign in directly: see Connect an app by signing in. Through Zapier, the panel walks three steps, shown at its top: Connect Calendly in Zapier, Choose tools, and Check it, add to an agent.
Step 1: Connect Calendly in Zapier
The step starts with what to add in Zapier:
“In Zapier, open MCP and add this Calendly action: Create One-Off Meeting Link. Set Host User to the person customers book with, and Event Name, Duration, Start Date and End Date to “Choose a value”. Then open your server’s Connect tab, create credentials, and copy the Full URL under “Option 2: URL with token”. It’s shown only once.”
Open Zapier MCP opens Zapier in a new tab. The other apps ask for these actions:
| App | Actions to add in Zapier | Tools it makes |
|---|---|---|
| Calendly | Create One-Off Meeting Link | Create a booking link |
| HubSpot | Find Contact, Create or Update Contact | Find a contact, Update a contact |
| Airtable | Find Record, Create Record | Find a record, Add a record |
Then connect. If you have not connected Zapier yet, the step offers the same two ways as the Zapier card, and suggests:
“Easier: choose “Sign in with Zapier” below and allow it in the popup. You can skip copying the address.”
If you already have, the step says “Using your Zapier connection (Zapier)”. Add the new actions to that same server in Zapier and press Continue. One Zapier server serves every app you set up through it.
To use another Zapier account instead, press Use a different Zapier account:
“Paste the server address of your other Zapier account. It’s added as another key on Zapier.”
Paste it in Paste your server address and press Add account. An address without its token is refused: “This address has no key in it. In Zapier, open your server’s Connect tab, create credentials, and copy the Full URL under “Option 2: URL with token”.”
Step 2: Choose tools
The app’s actions come first, already ticked, under the names Omni Octo gives them, such as Create a booking link. One that asks the customer first shows the question it will ask, and each says where it starts: Messages and calls or Messages only.
An action you have not added in Zapier yet is listed too:
“Not added in Zapier yet: Create a booking link.”
Add it in Zapier (Open Zapier), then press Check again. Anything else on your server is under Other tools on this server, unticked.
Step 3: Check it, add to an agent
The last step reads “Check it, then add it to an agent” — “1 tool added. Check one, then choose the agents that use them.”
Check Create a booking link runs a dry check: “A dry check: nothing is sent to Zapier.”
| It says | What it means |
|---|---|
| ”The request is ready. Nothing was sent.” | The tool is set up right |
| ”This tool needs a value for airtable_base. Each agent sets its own on its Integrations tab.” | Nothing is wrong: each agent fills in its own value |
| ”The check didn’t pass. Open the tool on the Tools tab to see why.” | Open the tool and run its check there |
Airtable’s tools need to know which base and table to use, and each agent chooses its own: “On its Integrations tab, each agent asks for its own airtable_base, airtable_table.”
Under “Add these tools to an agent on its Integrations tab.” is a button for each agent. Copperleaf Front Desk opens that agent’s Integrations tab, ready to add the tool. See Give an agent tools from your other systems. Done opens the integration.
Zendesk
Zendesk is reached through your Zapier server, but it has no fixed list of actions. Its card offers Sign in with Zapier and Server URL with token, and under the sign-in it says:
“After you sign in, open your Zapier MCP server, choose Managed and add the Zendesk actions your agents need. Then press Refresh.”
Then tick the Zendesk actions your agents need under Choose tools.
If your workspace already has Zapier connected, the Zendesk card says Added and opens your Zapier integration, because it is the same server. Add the Zendesk actions in Zapier, then use Choose tools on the integration’s Tools tab.
After you connect
Zapier is an integration like any other, with Overview, Tools, Authentication, Settings and Activity tabs. Each Zapier account is a key on the Authentication tab; one added with Use a different Zapier account is called Another Zapier account.
When you add actions to your server in Zapier later, they are not added as tools by themselves. Press Choose tools on the Tools tab, or Refresh tools in the menu beside the integration’s name. An action that changed in Zapier pauses until you review it: see When an integration needs you.
Before customers reach the tools, test them safely.